threaded exhaust port

Jack Steinbuch

Reduce the Noise Level on Your Vibratory Equipment

By Jack Steinbuch

OSHA specifies that a hearing conservation program should be in place when “noise exposure is at or above 85 decibels averaged over 8 working hours, or an 8-hour time-weighted average (TWA)”. This can be an issue for some vibratory equipment. However, we have selections available that will reduce noise levels which can result in many positives for your facility (OSHA).

For example, did you know investing in noise-reducing vibration can lead to an increase in productivity and overall safety? High noise levels can lead to short- and long-term physical damage including ringing ears, temporary changes in hearing, and long-term hearing damage or loss. But, less commonly known, it can also put a strain on your pocket by reducing productivity, contributing to poor communication and concentration, and can even contribute to workplace accidents by limiting your employee’s ability to understand speech (OSHA).

Since there is a wide variety of vibratory equipment, for this blog, we will focus on “brute force” vibratory equipment.  The vibrating body is directly installed on the equipment and is driven by a vibrator or dual motors, and the supporting structure is isolated from the vibrating body. Now let us look at potential ways to reduce their noise level:

Read More…
Share this blog post:
FacebooktwitterlinkedinmailFacebooktwitterlinkedinmail
Avatar

Automate the Hammer Swing by Following These 5 Steps

By Cleveland Vibrator Team

Our team is frequently asked about the proper installation of our Single Impact Air Knocker units. Since these units require two strokes of air for proper operation, the required components and installation process are slightly different than a more traditional pneumatic piston vibrator. Here, we will answer frequently asked questions and walk through the step-by-step installation process.

Step One

After properly sizing and selecting the units (which can easily be completed by utilizing our Vibrator Selection Guide!), it is time to install. First order of business, what are the components required for proper operation? There are a few items needed:

  1. The Single Impact Air Knocker (Complete with the Exhaust Port Protector and Grade 5 mounting hardware, provided with each unit)
  2. The Mounting Channel
  3. Hoses
  4. Valve
  5. Filter/Regulator/Lubricator
  6. Safety Cable
  7. Timer Box (Optional)

Read More…
Share this blog post:

FacebooktwitterlinkedinmailFacebooktwitterlinkedinmail
Avatar

Why Place Tapped Exhaust Ports on Pneumatic Industrial Vibrators?

By CVC Team

Back in the 1960s, Cleveland Vibrator Company (CVC) started to move away from the acceptable industry standard of the time and started to manufacture vibrators with tapped exhaust ports. Today a large part of our vibrators, including 100% of our Vibra-Might family group, have threaded exhaust ports. The primary reason for the threaded exhaust ports is to install our port protector/muffler in the port. The port protector has two primary functions. Read More…
Share this blog post:

FacebooktwitterlinkedinmailFacebooktwitterlinkedinmail
 Scroll to top