One of the perks about working for The Cleveland Vibrator Company when you’re a history geek like me, is digging through the archives and learning the rich history of your product development over the past century. Recently, I was able to get my hands on case histories dating back to the 1960s and came across one that highlighted our first-ever “Portable Air Piston Vibrator.” Nearly 50 years ago, Cleveland Vibrator assisted a precast concrete manufacturer when they wished to improve the consolidation and finish of their product using vibration. We specially designed a 1-1/4″ Piston Vibrator and attached it to a pistol-grip handle. The handle had been equipped with a special thumb grip trigger that activated the vibration and this piece of vibratory equipment weighed only 10 lbs. This light-weight and portable option gave the manufacturer the power to apply vibration to problem-child areas within their production, leaving the application locations completely limitless. How much did this unit cost? For the vibrator, 5′ hose and lubricator, this manufacturer paid $80. Read More…
Katy Sabo has been the Industrial Vibrator Duchess of The Cleveland Vibrator Company since 2014. The originator of #VibrationEducation, Katy has helped create CVC brand awareness across the globe and has made it her personal priority to share the importance of Industrial Vibration with anyone willing to listen! When she isn’t shaking things up in the Marketing Department, you can usually find her shopping with her favorite sidekicks (she’s the proud mom of two little ladies), going on long walks/runs with her favorite furry family members, or rooting on any Cleveland team with her diehard fan of a husband.
One of our strong suits has always been the ability to manufacture special vibrators for tough applications. The mining industry can be a major challenge for any air piston vibrator do to heat, extremely dusty environment and just the harshness of the application to include operating the vibrators in a 24/7 operation. The Erie Mining Company in Northern, Minnesota had such a process. They were established in 1957 for the mining of taconite ore. The process involved taking taconite, which is a hard low-grade iron ore mixed in with nonferrous rock and grinding it to separate the low grade iron ore. One of the intermediate processes is screening for further separation. This is where Cleveland Vibrator came into play. Read More…
Being in this industry for a long time, we can relate to the uncertainty surrounding when you should grease your Rotary Electric Vibrators and how much grease you should apply. We offer an easy-to-follow installation and operation manual to our customers that discusses the specifics for each vibrator.
A section of the manual addresses proper greasing of the bearings, including when to apply the grease and how much to apply. The manual explains a ratio that takes into account the intervals vs. the actual running hours. This ratio will help determine when greasing the unit is necessary. There is, in my opinion, a “grey” area. Our Rotary Electric VIbrators need a certain amount of grease (measured in grams) to be adequately lubricated.
How do you determine the amount of grease for your rotary electric vibrator when the amount of grease per pump of the grease gun handle is unknown?
One method we’ve heard over the years is if the bearings begin to make noise, simply give each bearing five or six pumps from the grease gun and let it run for a few minutes. If this quiets the bearings after a few minutes, then you’re good to go. If not, repeat the process.
Is this recommended by The Cleveland Vibrator Company to properly lubricate the bearing? Well, no, it’s not. However, this type of greasing exists, and some swear by it. There is an old saying, “if it ain’t broke, don’t fix it,” and if it works for some folks, then we would not try to change the way they do it. However, for a straightforward approach, we looked at the amount of grease generated by one pump of a standard manual lever-operated grease gun and headed to our testing lab.
We took our standard grease gun, which uses a 14.8 ounce/420-gram cartridge, weighed out how much grease was in one pump, and then converted it to grams. We checked what the standard amount of grease would be for a grease gun of this size. The amount varied from 1.25 grams per pump to 2.25 grams, depending on how efficient your grease gun was.
A quick note that the grease we use is PREMALUBE Heavy-duty NLG1 #2 Multi-Purpose Grease H2, the manufacturer is Lubemaster. If you are working with a pneumatic vibrator, we have a blog that outlines what lubrications should NOT be used for your unit, click here to check that out.
We took many circumstances into account when performing our testing of the grease gun in our lab, such as:
The greasing procedure is not perfect
The effect of different operators
Condition of the grease fittings
Environmental temperature
The condition of the grease gun
We went with 2.0 grams per pump, even with our measured weight being closer to 1.75 per pump. You can damage the bearing and cause premature failure of the unit, so it is essential to not over-grease. We concluded 2.0 grams per pump is best to prevent under-greasing as well. Refer to our RE 1200 RPM Rotary Electric Motor greasing chart illustrated below: “RE 80-6 Vibrator.” The chart indicates that adding 50 grams of grease per bearing after 1600 hrs, at 2.0 grams per pump, would be 25 pumps of the grease gun, and would add a plus or minus 10 to 20% facture to this.
You should note that you can also do half-life greasing which in the RE 80-6 case would be 12 or 13 pumps per bearing. We have included greasing charts for all RPMs below. Note that some models are permanently lubricated at the factory.
Need more information about the maintenance of your vibratory equipment? We are here to help! Click here to speak to our knowledgeable Sales & Services Team.
When I first started at Cleveland Vibrator in ’68, we had an “Oldtimer” by the name of Richard Placek who worked here and eventually retired from Cleveland Vibrator after over 40 years of loyal service. Rich was in charge of our tool and die area and among his many responsibilities was to build jigs and fixtures to assist in producing our many vibratory products. Along with that responsibility, Rich would work with our local pattern maker and make any final adjustments to our mostly wooden pattern equipment before sending it on to the foundry for producing sample castings. Rich Placek was indeed a very valuable part of the organization. Back then, trade shows were very important to attend and exhibit our products produced and sold by Cleveland Vibrator. Rich came up with an ideal to make-up some small keychain vibrator blanks and hand out to interested visitors at our industrial shows. Our customers liked the small key chain type units and comments were made about turning them into working models. Of course this was music to Mr. Placek’s ears and he started working on a Cleveland Vibrator miniature vibrator. It actually turned out to be the very first prototype Vibra-Mite Vibrator which is now our primary line of vibrators, VM-25s in particular. Read More… Share this blog post:
Recently, I took a whirlwind trip through the heartland. During this trip, I had the opportunity to visit plants and equipment makers installing and using vibrators. While in the field, I encountered damaged equipment, including cracked hopper walls that had to be re-welded.
Too often, the vibrator gets a bad rap in these situations. However, in reality, the damage is a function of incorrect sizing or installation of the vibrator. So to clear up any misconceptions, here are three easy recommendations to prevent future equipment damage:
Craig Macklin joined The Cleveland Vibrator Company in 2010. Although his prior experience is mired in the world of theoretical, intangible products and services such as software and consulting sales, the past 11 years have developed his passion for this industry and molded the vibration expert we know today. Now, as President and CEO, Craig has a deep understanding of the value and importance of industrial vibration to numerous industries and applications. He enjoys fine, locally roasted espresso, good food, and spending the day with his wife and two daughters. He has cried at multiple Browns and Indians games and likes to get outside and golf in his free time.
What’s his area of expertise, you ask? “Making sure the people on our team are better and smarter than I am.” – Craig Macklin
From my perspective industrial applications for vibrators and vibratory equipment tend to fall into three broad categories. The first and largest of these groups is the “standard” application, whether for individual vibrators or for equipment. Similar problems have been seen before and solved with “off the shelf products”. In the world of individual vibrators, these standard applications tend to involve flow aids for stationary hoppers and bins where both pneumatic and electric vibrators have proven over the years to be viable solutions. Appropriate vibrators can be selected or recommended based on the size of the hopper, weight of the material, hopper design (to include shape and wall thickness) and nature of the material.
My second broad group is somewhat smaller than the “standard” group and involves more customer interaction and discussion to arrive upon a suitable solution. These types of challenges would fall into what I’d call the “cooperative” group. Read More… Share this blog post:
